Contents
- 1 How do you get the chorus effect without a pedal?
- 2 What songs use chorus effect?
- 3 Does the edge use chorus?
- 4 What type of effect is chorus?
- 5 Is a chorus pedal worth it?
- 6 Do you use chorus pedal?
- 7 What songs use a flanger?
- 8 What chorus did the police use?
- 9 What songs use reverb?
- 10 What delays does the edge use?
- 11 What shimmer does the edge use?
- 12 How do you use the chorus effect?
- 13 What is the difference between chorus and reverb?
- 14 What is the difference between chorus and flanger?
- 15 Can a flanger sound like a chorus?
How do you get the chorus effect without a pedal?
How to get a chorus effect without a chorus pedal
- With your multitrack recorder of choice (I suggest a Zoom R8,) record a riff on track 1.
- Record the exact same riff on track 2.
- Pan track 1 50% to the left.
- Pan track 2 50% to the right.
- Decrease the bass EQ for both tracks so they don’t “boom” too much.
What songs use chorus effect?
Table of Contents show
- Come As You Are – Nirvana.
- Pull Me Under – Dream Theater.
- Welcome Home (Sanitarium) – Metallica.
- Purple Rain – Prince.
- Paradise City – Guns ‘n’ Roses.
- Getting the Most out of a Chorus Pedal.
Does the edge use chorus?
In the following years The Edge would pretty much redefine how we all viewed delay pedals, but he was also no stranger to a chorus pedal. The guitar line for “I Will Follow” is a perfect example of a well-placed chorus effect.
What type of effect is chorus?
Chorus is a type of modulation effect that functions very similarly to flanger pedals. As its name suggests, a chorus pedal’s purpose is to thicken and color your signal enough to sound as if there are multiple guitars—a chorus of them—playing one part.
Is a chorus pedal worth it?
A chorus pedal is a great way to create thicker sounds from a single signal. By taking your source signal, doubling it and setting the second signal slightly out of tune and time with the first, a chorus pedal can create the sound of two instruments playing simultaneously.
Do you use chorus pedal?
Chorus is a modulation effect, and as such, it should be placed fairly late in your pedal chain. It should come after a wah pedal, compression pedal, overdrive pedal, and distortion pedal, but before your delay pedal, tremolo pedal, or reverb pedal.
What songs use a flanger?
7 Songs That Show Off Flangers & Phasers
- 2. ” Head Over Heels” by Tears for Fears – This is one of the truest, cleanest, most exciting flanger effects ever put on tape.
- 4. ” Just The Way You Are” by Billy Joel ““ That’s a phaser on the famous Fender Rhodes intro.
- 6. “
What chorus did the police use?
One, used with his Fender Telecaster, Strat and Gibson 335, comprised a solid-state Roland JC120 Jazz Chorus amp, with the chorus always switched on in order to produce the slightly out-of-tune guitar sound that was all the rage during the early ’80s.
What songs use reverb?
8 Songs that Belong in the Reverb Hall of Fame
- King Tubby “Dub You Can Feel”
- Joe Meek “I Hear A New World”
- Led Zeppelin “When The Levee Breaks”
- Grimes “Venus In Fleurs”
- The Drums “Down By The Water”
- Shinedoe “Cosmic”
- Phil Collins “In The Air Tonight”
- Blake Mills “Shed Your Head”
What delays does the edge use?
Edge often uses the Korg SDD-3000 delay units; the TC-2290s, as used on ‘Streets’, are pictured above. Sending the different delays to separate amps allows more control when mixing the songs — you can vary the levels, or send 1 delay to the left and another to the right. Edge/U2 do this in a few songs.
What shimmer does the edge use?
Edge uses an Eventide harmonizer now for his shimmer.
How do you use the chorus effect?
Chorus Effect Techniques Slam the feedback level up to roughly 90%, set a 40ms delay and dial in the chorus rate to about 0.07. Once this is done you can make a huge spike in the chorus depth at the end of the sound to give it an energy discharge.
What is the difference between chorus and reverb?
A chorus pedal creates a slightly detuned version of your signal blended with your normal signal to create different effects, while a reverb emulates the bouncing of sound waves across different rooms and objects (plate, spring).
What is the difference between chorus and flanger?
The flanger and the chorus are both modulation effects that use delay in a similar way. A main difference between the two is that a flanger uses shorter delay times than a chorus. Another difference is that unlike a flanger, a chorus does not have regeneration (delay feedback).
Can a flanger sound like a chorus?
As sonic chameleons, flangers can create lush chorus sounds, airy harmonic textures, moody frequency swirls, sweeping jet-airplane swooshes, seasick pitch warbles, or sci-fi ray-gun blasts.