- 1 Is chorus a form of delay?
- 2 Should I put chorus before or after delay?
- 3 How do you use delay in mixing?
- 4 What comes first phaser or chorus?
- 5 What do delay pedals do?
- 6 What order should my pedals be in?
- 7 Where does delay go in effects chain?
- 8 What is an example of a chorus?
- 9 What a chorus effect does?
- 10 How do you add chorus to vocals?
- 11 How do you delay effectively?
- 12 How do you set vocal delays?
- 13 How do you set Slapback delay?
Is chorus a form of delay?
This is an established method of adding depth and a sense of movement through by blending a slightly detuned and delayed signal with the source material. Chorus can be applied to a variety of sound sources that include guitars, bass and vocals.
Should I put chorus before or after delay?
Chorus is a modulation effect, and as such, it should be placed fairly late in your pedal chain. It should come after a wah pedal, compression pedal, overdrive pedal, and distortion pedal, but before your delay pedal, tremolo pedal, or reverb pedal.
How do you use delay in mixing?
When and How to Use Delay in Your Mix
- Play with various note division options to add rhythmic variety.
- Use a tape delay in place of a chorus or doubler for a more natural and warm thickening effect.
- Add depth to any sound with feedback.
- Use delay as a momentary effect to make your productions more interesting.
What comes first phaser or chorus?
Traditionally you want your phaser first, then flanger and chorus in whatever order after that. But there’s nothing wrong with putting your chorus first and phaser last. That’s how neat sounds get created. I’ve had my chorus before my phaser for years.
What do delay pedals do?
A delay pedal is a stompbox effect that records and plays back any music fed into it. Usually this playback happens in milliseconds. With long extended playback times, delay pedals produce cascading walls of sound—great for creating atmospheric landscapes.
What order should my pedals be in?
Dynamics (compressors), filters (wah), pitch shifters, and Volume pedals typically go at the beginning of the signal chain. Gain based effects such as and overdrive/distortion pedals come next. Modulation effects such as chorus, flangers, phasers typically come next in the chain.
Where does delay go in effects chain?
The end of the signal chain is where the delay/echo and reverb effects should be placed – preferably with the delay in front of reverb – primarily because both are “ambience” effects that give the illusion of a sonic space or atmosphere.
What is an example of a chorus?
The definition of a chorus is a group of singers or a refrain in a song. An example of a chorus is a church choir. An example of a chorus is the part of a song that repeats several times. A group of dancers and singers performing together in a modern musical show, opera, etc.
What a chorus effect does?
Chorus effects will fatten up the sound of a bass, rhythm guitar, or solo guitar. They can be used with distorted sounds but are a fantastic way to create full-sounding clean sounds as well. Used with a stereo amp rig, chorus adds spaciousness.
How do you add chorus to vocals?
Try Adding a Subtle Chorus Effect. Another way to give the vocal a bit of depth and shimmer is to apply subtle chorusing. Again, you don’t want the effect to be noticeable. Add a stereo chorus to the vocal and increase the wetness until you notice the effect, then back it off a touch.
How do you delay effectively?
One really cool thing you can do with a delay is to turn a mono sound into a stereo one. This works by pulling up a mono sound on two channels, panning one hard left, one hard right, and putting a delay on one side. Turn the wet/dry ratio to 100% wet, set the feedback to zero, and time the delay between 5 to 20ms.
How do you set vocal delays?
The timing of the delay should be based on the tempo of the song and the pace of a vocal. Slower tempos with legato vocals allow for longer delay times. Faster tempos with busy vocals will require shorter times to achieve the necessary effect without clouding the performance.
How do you set Slapback delay?
To achieve a slapback delay, you ideally want a perfect balance between dry and wet. So if you set the dry/wet mix to 50%, the delayed signal will be the same volume as the original signal. This setting might be labeled as ‘ Delay ‘ or ‘ Delay Time’.