How do you use the chorus effect?

Chorus Effect Techniques Slam the feedback level up to roughly 90%, set a 40ms delay and dial in the chorus rate to about 0.07. Once this is done you can make a huge spike in the chorus depth at the end of the sound to give it an energy discharge.

Is chorus a stereo effect?

Stereo chorus effect processors produce the same effect, but it is varied between the left and right channels by offsetting the delay or phase of the LFO. The effect is thereby enhanced because sounds are produced from multiple locations in the stereo field.

Who invented the chorus effect?

But the classic chorus we know today was developed by Roland in the mid-1970s, and the first standalone chorus pedal was Boss CE-1. The circuitry it used was already presented with Roland Jazz Chorus amp. After that, in the late 70s and all over the 80s, the usage of the effect simply boomed.

What instruments use chorus?

The other effect is reverb (reverberation). Chorus adds a swirling property to a sound that it is applied to, thickening the sound. Chorus is commonly used with instruments like the electric piano and guitar and with synthesizers. Most sound cards that have an onboard MIDI sound set contain both chorus and reverb.

What comes first phaser or chorus?

Traditionally you want your phaser first, then flanger and chorus in whatever order after that. But there’s nothing wrong with putting your chorus first and phaser last. That’s how neat sounds get created. I’ve had my chorus before my phaser for years.

Do you use chorus pedal?

Chorus is a modulation effect, and as such, it should be placed fairly late in your pedal chain. It should come after a wah pedal, compression pedal, overdrive pedal, and distortion pedal, but before your delay pedal, tremolo pedal, or reverb pedal.

How does a stereo chorus work?

Stereo chorus is even more interesting and dynamic and works by inverting the polarity of the delayed signal and combining it with the dry signal in one channel whilst keeping the polarity the same for the delayed and dry signals in the other channel.

What is an example of a chorus?

The definition of a chorus is a group of singers or a refrain in a song. An example of a chorus is a church choir. An example of a chorus is the part of a song that repeats several times. A group of dancers and singers performing together in a modern musical show, opera, etc.

What is chorus rate?

Chorus Rate (or Chorus Speed) The modulation rate is the frequency of the LFO (low-frequency oscillator) we discussed earlier. The chorus rate is how fast the effect moves back and forth from one extreme amount to the other. It controls how fast the swirliing of the chorus sound moves.

What chorus did the police use?

One, used with his Fender Telecaster, Strat and Gibson 335, comprised a solid-state Roland JC120 Jazz Chorus amp, with the chorus always switched on in order to produce the slightly out-of-tune guitar sound that was all the rage during the early ’80s.

What songs use chorus effect?

Table of Contents show

• Come As You Are – Nirvana.
• Pull Me Under – Dream Theater.
• Welcome Home (Sanitarium) – Metallica.
• Purple Rain – Prince.
• Paradise City – Guns ‘n’ Roses.
• Getting the Most out of a Chorus Pedal.

What is chorus effect on vocals?

Chorus units receive an input signal, delay it for a few milliseconds and then ‘widen’ its tuning, usually by detuning a ‘copy’ of the part a little flat and another a little sharp. These copies are then played back, producing a vocal which occupies a wider, thicker pitch base and therefore has more presence in a mix.

What is the difference between chorus and flanger?

The flanger and the chorus are both modulation effects that use delay in a similar way. A main difference between the two is that a flanger uses shorter delay times than a chorus. Another difference is that unlike a flanger, a chorus does not have regeneration (delay feedback).

Why do chorus pedals have 2 outputs?

This is because a chorus pedal will essentially take your guitar’s signal and split it into two. While one of those split signals will remain unaltered to retain some of your pure unaffected tone, the other signal will be slightly delayed and pitch-modulated/detuned.

What is the difference between chorus and verse?

The primary difference between the two is that when the music of the verse returns, it is almost always given a new set of lyrics, whereas the chorus usually retains the same set of lyrics every time its music appears.” Both are essential elements, with the verse usually played first (exceptions abound, of course, with